TL;DR: The 2026 business mileage rate changes on July 1. Use 72.5 cents per business mile for January 1 through June 30, and 76 cents for miles driven on or after July 1. Split your records at June 30, calculate both deduction methods for the truck, and have a CPA confirm the first-year choice.

2026 has two business mileage rates

The IRS changed the business mileage rate in the middle of 2026. Miles driven from January 1 through June 30 use 72.5 cents per mile. Miles driven on or after July 1 use 76 cents per mile.

Notice 2026-10 set the rate at 72.5 cents beginning January 1, 2026. That was a 2.5 cent increase from 2025. The later 2026-11 announcement changed the rate to 76 cents for miles driven on or after July 1. The IRS said, “This modification results from recent increases in the price of fuel.”

Notice 2026-10 still governs the miles before July 1. Your mileage log should show that split. Do not enter the whole year at 72.5 cents. Do not enter the whole year at 76 cents.

For an electrician, the business miles can add up through job-to-job trips, supply house runs, permit visits, and inspection visits. The rate only works when the underlying business mileage is recorded.

The IRS says, “Use of the standard mileage rates is optional.” You can use the standard mileage method, or you can calculate actual vehicle expenses. Those methods do not produce the same result, and the method you choose in the truck’s first business year can limit what you do later.

The standard rate is simple, but actual expenses may fit a costly truck better

The standard mileage method applies a set IRS rate to your business miles. For 2026, that means two rates because the IRS changed the amount during the year.

The actual expense method uses the vehicle’s actual costs under the applicable tax rules. For a service truck, those costs can be significant. A heavily loaded truck may cost more to operate than a lightly used or older vehicle. Fuel, repairs, and the truck’s overall operating cost can make actual expenses produce a larger deduction.

The opposite can also happen. A lightly used or older truck may produce a better result under the standard mileage rate. You will not know which method is better from the truck payment alone.

Calculate both methods for the truck. Do that before the first year ends and before the first-year election becomes the choice that constrains later years. Then have a CPA confirm the method for your return.

The vehicle may have both business and personal use. You may deduct only the business-use portion. Your records need to support that portion.

The truck cost also belongs in your business pricing. If you are setting an hourly rate or day rate, see what electricians charge hourly, by day rate, and as a call-out. If you price every job separately, account for drive time instead of treating the truck as free overhead. The method is covered in how to price electrical jobs without underbidding.

The first year is the fork in the road

For a vehicle you own, you must choose the standard mileage rate in the first year the vehicle is available for business use if you want that method available as an option. In later years, you can choose either method, subject to the IRS limits.

That first-year choice matters because some deductions and depreciation methods lock the vehicle out of the standard mileage rate.

You cannot use the standard mileage rate if you:

  • Operated five or more vehicles at the same time in a fleet operation.
  • Claimed depreciation by a method other than straight-line depreciation.
  • Used MACRS for that vehicle.
  • Claimed a Section 179 deduction for that vehicle.
  • Claimed the special depreciation allowance for that vehicle.
  • Claimed actual expenses for a leased vehicle.

If you use actual expenses in the first year, you must claim the special depreciation allowance unless you elect out, according to IRS Topic 510. That makes the first-year choice on a new truck a real fork. Claiming Section 179 or the special depreciation allowance on the truck locks that vehicle out of the standard mileage rate.

If you used the standard rate in the first year and later switch to actual expenses before the vehicle is fully depreciated, you must use straight-line depreciation over the vehicle’s remaining useful life.

A leased vehicle has a separate long-term rule. If you choose the standard mileage rate for a leased vehicle, you must use that method for the entire lease period, including renewals.

Do not choose a method based only on what is easiest to enter in the bookkeeping software. Calculate both methods first. The first year can affect later years.

The IRS wants mileage written down, not just job addresses

Publication 463 says a transportation record should show the mileage for each business use and the total miles for the year. “You must generally prepare a written record for it to be considered adequate.”

A calendar full of jobs is not the same as a mileage record. A stack of invoices is not the same as a mileage record. The IRS wants the mileage itself written down.

The record should identify the business use and the miles connected to it. It also needs the total miles for the year so you can support the business-use portion of the truck.

A weekly log can count as timely. Publication 463 says, “A timely kept record has more value than a statement prepared later when there is generally a lack of accurate recall.” A weekly log that covers the week’s use counts as timely.

That matters on a busy service schedule. When the phone is answered, intake asks the caller for the jobsite address and the problem. Each call lands in the log with a time, a caller, and a jobsite address. If you are rebuilding the week on Friday, that call log can help you remember which addresses the truck visited and on which dates.

It is a memory aid. It is not a mileage record. The IRS wants the mileage itself written down.

Wirewoman answers 24/7, books jobs to the calendar, sends the job summary by SMS within 30 seconds of the call, and logs every call to a dashboard. Wirewoman does not track mileage or odometer readings. The mileage log still comes from you or from a mileage app.

Keep business records as long as they may be relevant. IRS Topic 305 says that generally means keeping them until the period of limitations expires for the return.

The 2026 calculation must split at June 30

The cleanest way to handle the rate change is to split your 2026 odometer records at June 30.

Here is illustrative arithmetic only:

  • 10,000 business miles from January through June multiplied by $0.725 equals $7,250.
  • 10,000 business miles from July through December multiplied by $0.76 equals $7,600.
  • Total standard mileage amount equals $14,850.

Those are not anyone’s actual numbers. Your result depends on the business miles you recorded in each period.

Put the June 30 split into the log now. If your mileage app allows rate periods, set up the two 2026 rates. If you use a spreadsheet or paper log, create separate January through June and July through December totals.

Do not wait until tax preparation to decide which miles belong in which period. Reconstructing two rate periods from memory is exactly the problem a timely log avoids.

A service truck can create fewer miles through better dispatching

Mileage is affected by how the shop operates. A call that requires a return trip to the supply house adds driving and time. Stocking the service van so a call does not become a second trip can reduce those return trips. See stocking an electrician service van for return trips.

That operational choice does not replace the mileage record. It changes the miles you drive and the cost you need to price into the work.

The same records can help you review whether the truck is earning its place in the business. Compare the miles, vehicle costs, job revenue, and drive time. The mileage deduction is one tax calculation. The truck is also a production cost.

Other shop bookkeeping matters sit beside this decision. For California materials and fixtures, see electrician sales tax in California for materials and fixtures. Keep that work separate from the vehicle log.

Put the June 30 split and first-year choice on this week’s list

Do these four things:

  1. Split 2026 business miles into January 1 through June 30 and July 1 through December 31.
  2. Record the mileage for each business use and the total miles for the year.
  3. Calculate both standard mileage and actual expenses for the truck.
  4. Ask a CPA to confirm the first-year method, especially before claiming Section 179, the special depreciation allowance, or another depreciation method.

If the truck is leased, confirm the method for the entire lease period, including renewals. If the truck has personal use, separate the business portion. If the shop operates five or more vehicles at the same time, check the fleet-operation limitation before using the standard mileage rate.

The immediate change is simple: stop using one 2026 rate for the whole year. Use 72.5 cents through June 30 and 76 cents starting July 1, based on written mileage records. Then make the first-year method decision with both calculations in front of you and a CPA confirming the choice for your return.